1. Find the location where there is the water meter and the main valve closing the plant;

2. Decide where and how to place the Magnetic Limestone Protection PURAK;
3. Check that the selected location will allow easy insertion of the Magnetic Limestone Protection PURAK, and the tightening of the components required for installation;
4. The Magnetic Limestone Protection PURAK doesn’t have a specific way of positioning, consequently, the input and output of water from the device that is chosen, doesn’t affect its operation;
5. Check and make a list of all the components that are needed for the installation, according to the plant you have;
6. Before installation, close the main valve of the water system;
7. Open a faucet and check that water does not come from the same;
8. Stop the piping downstream from the water meter to install the Magnetic Limestone Protection PURAK;

9. Connect the Magnetic Limestone Protection PURAK  in the way you choose, and make the connection to the pressure seal system;

10. Before PURAK install a filter in order to hold soil or other residual materials contained in the water;
11. Check that the connections are made and take care of all the details;

12. Open the main valve of the water, making sure there are no leaks;

13. Finish installation.